Fixed quote after a free call

Fee proposal and terms automation for architects and interior designers

We build a workflow that turns discovery call notes into a draft fee proposal and terms of engagement from your own templates, sends them for e-signature once the principal has edited and approved them, follows up politely, and on signature issues the retainer invoice and opens the project. A typical build costs $1,000 to $2,500 and takes about three to four weeks.

The problem

Why fee proposals stall design studios

Writing an architectural fee proposal or interior design proposal takes hours: scope by stage, exclusions, fee basis, payment schedule and terms. When it finally goes out, follow-up depends on someone remembering, and prospective clients often compare several practices.

Terms matter more than most studios admit. In the UK, ARB guidance says architects should give written terms before work starts and record changes in writing, and in the UK and EU many consumer clients have cancellation rights that affect when work can begin.

What we build

What our fee proposal automation includes

Drafts from your templates

Scope by stage, exclusions, fee basis and payment schedule assembled from your own clauses and call notes, for the principal to edit.

E-signature

Approved proposals and terms sent through DocuSign, PandaDoc or your studio platform's signing tool.

Polite follow-up

A few check-ins timed from sending and opening, stopping on signature, decline or a request to pause.

Retainer on signature

The retainer invoice issued in QuickBooks, Xero or your studio platform, with a payment link.

Project opened

Client, fee and stages created in the project tool when terms are signed and the retainer is paid.

Proposal log

Proposals by status, age and fee, with reasons for declines.

Who does what

Automation does the chasing, people make the calls.

Every step is marked: what runs on its own, what a member of staff reviews and what stays with a person who decides.
  1. 01 Automated

    Call notes saved

    Discovery call notes and questionnaire answers are attached to the deal.

  2. 02 Automated

    Draft prepared

    A draft proposal and terms are assembled from templates.

  3. 03 Studio manager review

    Principal edits

    The principal edits scope, fee and terms and approves sending.

  4. 04 Automated

    Sent and followed up

    E-signature, check-ins and retainer invoice run automatically.

  5. 05 Principal or lead designer decides

    Fee and scope set

    Fees, scope and contract terms are decided by the principal, never by the template.

How it behaves

How proposals and terms behave

What each person sees and what runs in the background, including what happens when something goes wrong.

What the client sees

  • A clear proposal soon after the discovery call
  • Simple e-signature on any device
  • A retainer invoice with a payment link

What the studio sees

  • A ready draft to edit instead of a blank page
  • Proposal status and follow-ups in one log
  • Projects opened automatically on signature

What the automation does

  • Assembles drafts from your templates
  • Sends, follows up and stops on decision
  • Issues invoices and opens projects

Edge cases and fallbacks

Client asks to change scope before signing
Follow-ups pause and the principal revises the proposal.
Signed but retainer unpaid
A reminder goes out and the project stays in pending until the principal decides.
Proposal declined
The reason is logged for the monthly report.
E-signature or accounting outage
Actions are queued and retried, and the studio manager is alerted.

Architecture

Fee proposals to signed terms at a glance.

The setup we usually start from. We adapt it to the phone system and practice software you already use.
Call notes Questionnaire too Draft builder Your templates Principal Edits, approves E-signature DocuSign, PandaDoc Retainer invoice QuickBooks, Xero Project opened Project tool
  • Input
  • AI step
  • People
  • Output
  • Data

How it flows

  1. 1 Discovery call notes and questionnaire answers feed the draft builder.
  2. 2 A draft proposal and terms are assembled from your templates.
  3. 3 The principal edits and approves, and the documents go out for e-signature with follow-ups.
  4. 4 On signature the retainer invoice is issued and the project opens in your tool.

Project planner

How the project runs, phase by phase.

Typical durations for a first version. Your proposal lists the exact phases, dates and what you sign off at each step.

Fee proposal, terms & e-signature automation project plan

Typical time to launch: about 3 weeks, then support

  1. 01

    Discovery

    2 to 3 days

    Current proposals and terms, fee bases, signing and accounting tools.

  2. 02

    Design

    2 to 3 days

    Template structure, clause library, follow-up timing and hand-off rules.

  3. 03

    Build

    About 1 week

    Draft builder, e-signature, follow-ups, invoice and project creation.

  4. 04

    Shadow run

    About 1 week

    Drafts produced for live enquiries while the principal compares with their own.

  5. 05

    Launch

    1 to 2 days

    Switch on and walk through editing and approval.

  6. 06

    Support

    Ongoing

    Template and clause updates.

What it runs on

Real products only, connected through the access each vendor provides. See all integrations

n8n DocuSign or PandaDoc API QuickBooks Online API or Xero API Monograph, BQE CORE or Programa Google Docs or Microsoft Word templates Claude or OpenAI for draft assembly

Cost estimate

What it costs, line by line.

Estimates to plan with. Your fixed quote follows a free call, once we have seen your systems and volumes.
  • Discovery and design

    Templates, clause library and timing.

    $200 – $400

  • Build

    Draft builder, follow-ups, invoice and project creation.

    $500 – $1,300

  • Integrations

    E-signature, accounting and project tool.

    $150 – $400

  • Testing and shadow run

    Drafts compared with the principal's own.

    $100 – $250

  • Launch and training

    Switch-on and walkthrough.

    $50 – $150

  • Total project estimate

    $1,000 – $2,500

Optional monthly care after launch is quoted with your proposal. Fixed quote after a free call. Your legal adviser should review template terms; we do not write contract terms. E-signature and accounting tools are billed to you directly.

Monthly running costs you pay directly

Estimates from the vendors' published pricing, checked November 2026. Billed to you by each vendor, never marked up.

  • E-signature and accounting: DocuSign, PandaDoc, QuickBooks or Xero at each vendor's own plan.
  • AI model usage: Billed by the provider per use; drafting is usually a small monthly amount.

What pushes cost up

  • Systems without an API, or with integration access that must be requested from the vendor
  • Writing data back into your core system rather than only reading from it
  • Several locations, brands or very different processes to support
  • Custom apps, dashboards or a voice line on top of the workflows

What keeps cost down

  • One location and one clear process to start with
  • Cloud software with a documented API
  • Using tools you already pay for instead of adding new ones
  • Approved wording and sample data ready at the start
Get a fixed quote

Privacy and consent

Rules we design for, with the sources.

General information to plan with, not legal advice. Your counsel or data protection adviser confirms what applies to your practice.

UK: architects' written terms

ARB guidance: give clients written terms of engagement before work starts and document changes in writing.

Source: arb.org.uk

UK: consumer cancellation period

For distance and off-premises contracts with consumers, services should only start during the cancellation period at the consumer's express request; the workflow records that request.

Source: www.legislation.gov.uk

Not legal advice

Template clauses come from the studio and its advisers; automation assembles, never writes, contract terms.

How we deliver

Agile delivery, in 1 to 2 week sprints.

We deliver in short Agile sprints using Scrum, so you see working software every one or two weeks instead of waiting for a big reveal at the end.

Every sprint

  1. 1 Sprint planning. At the start of each sprint we agree which backlog items we will finish, each with written acceptance criteria you can check.
  2. 2 Daily stand-up. A short internal check-in on progress and blockers. You get a written update in your Slack or Teams channel, not another meeting.
  3. 3 Sprint review and demo. At the end of each sprint we demo what was built on test data or in a shadow run, and you accept it or ask for changes.
  4. 4 Retrospective. The team looks at what went well and what to change in the next sprint, and we share anything that affects you.

How scope stays under control

Product backlog
Every feature, fix and question in one prioritised list you can see at any time.
Acceptance criteria
Plain-language conditions for "done" on each item, agreed before work starts.
Change requests
New ideas go into the backlog with an estimate. Nothing changes scope or price without your written approval.
User acceptance testing (UAT)
Before launch your team tests the real workflow against the acceptance criteria and signs off.

Tools we use

Jira, ClickUp or Trello for the backlogSlack or Microsoft Teams for updatesGitHub for code and version historyLoom or a live call for demos

Project manager / Scrum master

Runs the sprints, keeps the backlog and timeline honest, and is your single point of contact.

Business analyst

Maps how the work runs today, writes the workflow specification and acceptance criteria with your team.

Automation engineer

Builds the n8n workflows, integrations, AI steps and error handling.

Backend developer

Writes custom code where a no-code step is not enough: APIs, data sync, secure storage.

Frontend / mobile developer

Builds forms, booking pages, dashboards, web apps or Android apps when the project needs them.

QA engineer

Tests every workflow against the acceptance criteria, including edge cases and failure paths.

DevOps engineer

Sets up hosting, access, backups, monitoring and alerts, and the deployment pipeline.

Who does what at each phase

Free call
Project manager, business analyst
Understand the problem, check it is worth automating and outline a rough range.
Discovery
Business analyst, automation engineer
Map the current process, systems and data, and agree success measures.
Design
Business analyst, automation engineer, backend developer
Write the workflow specification, data flows, compliance notes and backlog with acceptance criteria.
Sprints
Automation engineer, developers, QA
Build, test and demo in 1 to 2 week sprints; you accept or adjust after each demo.
UAT and launch
QA, DevOps, project manager
Your team tests and signs off, we switch on, monitor closely and train the team.
Support
Automation engineer, DevOps
Stabilisation window, then optional monthly care with monitoring and changes.

A point of contact

One person who can answer questions and approve decisions, with about an hour a week during the project.

Access

Admin or API access to the systems involved, created as separate accounts with the least access needed.

Sample data

Real but non-sensitive records (or de-identified ones) so we can design and test against reality.

Approved wording

Message templates, policies and consent wording (for SMS, your opt-in and opt-out text) reviewed by you.

Vendor agreements

Signed agreements with the software vendors that will handle personal data, such as a BAA or processor contract.

Time for testing

A few hours from the people who will use the system, for the demos and user acceptance testing.

Working system

Workflows, integrations and any apps running in your accounts, under your keys.

Documentation

Workflow specification, data-flow map, run book and exported workflow files.

Training

A walkthrough for the team and a short recorded video for new starters.

Handover

All access, credentials and code handed over; you can keep us or take it in-house.

Stabilisation window

Fixes for anything that does not meet the agreed acceptance criteria after launch.

Support options after launch

  • No plan

    You run it yourselves after the stabilisation window and contact us when you need a change.

  • Monthly care

    Monitoring, error alerts, small changes and updates each month, with an agreed response time.

  • Priority care

    Faster response times for business-critical workflows and a monthly review call.

How a project moves through our team

Free call PM and analyst Discovery Process and data Design Spec and backlog Sprints Build, test, demo Your review Accept or adjust UAT and launch Sign-off, go live Support Monitor and improve
  • Input
  • Logic and services
  • People
  • Output
  • Data

How it flows

  1. 1 A free call with the project manager and business analyst to understand the problem and whether it is worth building.
  2. 2 Discovery and design produce a written specification, data-flow map and a backlog with acceptance criteria.
  3. 3 The team builds in 1 to 2 week sprints; you review a demo at the end of each and accept or adjust.
  4. 4 Your team runs user acceptance testing, we launch, then monitor and improve under a support plan.

FAQ

Fee proposal, terms & e-signature automation questions, answered.

Yes. We turn your existing proposal and clause library into a template the workflow fills from call notes. The principal always edits and approves before it goes out.

It sits alongside it. If your studio platform already builds proposals, we automate the steps around it: drafting from notes, follow-up, retainer and project creation.

No. Terms come from you and your legal adviser or professional body templates. We assemble them consistently.

DocuSign and PandaDoc have documented APIs, and studio platforms such as HoneyBook and Dubsado include signing. We use what you have.

For UK and EU consumer clients, the workflow can record an express request to start work during the cancellation period and send the required information. Your adviser confirms the wording.

Days from discovery call to proposal, proposal to signature, acceptance rate, average fee and retainer paid on time.

Free 20-minute call

Want this for your architects & interior designer?

Book a free 20-minute call. We will look at how the work runs today, tell you honestly whether it is worth building and give you a fixed quote if it is.

Book a free 20-minute call